Whirlpool W10435039A installation instructions Determine Cabinet Opening

Determine Cabinet Opening

Your dishwasher has leveling legs. The following provides instructions to adjust the leveling legs to set the dishwasher to the correct height for your cabinet opening.

Measure height of cabinet opening from underside of countertop to floor where dishwasher will be installed (you will need to measure the lowest point on the underside of the countertop and the highest point on the floor). Refer to “Dishwasher Height Adjustment Chart” to adjust the leveling legs.

14

NOTE: If the minimum cabinet opening height is less than

34" (86.4 cm), the rear leveling legs can be removed for additional clearance. This will allow the dishwasher to fit into a 33⁷₈ " (86 cm) high cabinet opening, but the dishwasher will be more difficult to move. (Measurements are approximate. Rear and front leveling legs are preset at the factory for 34¹₂ " [87.6 cm].)

Turn front and rear leveling legs to the same height. Refer to “Dishwasher Height Adjustment Chart.”