Whirlpool WSR413YW0 Howto sanitizethestoragetank, If YouNeedAssistance, HowToArrangeForService

Howto sanitizethestoragetank

You will need to order Tank Sanitizing Kit, Part No. 4373527. You will also need household bleach and a measuring spoon.

1.Turn off saddle valve in water line. Open faucet and drain storage tank. There will be no water dripping when tank is empty.

2.Turn off faucet. Push in grey connector to disconnect yellow tubing from system. Connect yellow tubing to push in connector on side of sanitizing kit.

UsingROsystemafterlongperiods of non-use

1.Follow instructions for replacing cartridges.

2.Sanitize storage tank.

3.Sanitize RO System.

4.Follow “FlushSystem” instructions.

If YouNeedAssistance...

The WhirlpoolConsumerAssistanceCenterwill answerany questionsabout operatingor maintainingyour ROwaterfiltrationsystemnot coveredin

the InstallationInstructions/Useand Care Guide.The WhirlpoolConsumer AssistanceCenteris open 24 hoursa day,7 daysa week.Just dial l-800-253-1301-the call ib free.

Call l-800-253-1301 to order. Replacement Parts & Accessories

Replacement Cartridge Kit

Kit includes Sedimenl (S), GAC Carbon (GAC) and					I
-*c-~	Block (CBI	Carlridaes.	Cartridaes	can also
be ordered ind’iiid;ally. TFEM Membr&e Cartridge
r(RO) needs replacing only once every lwo years,
I when	indicator disk	light turns	yellow.		4373575
TFCM Membrane Cartridge (RO)					4373501
Sediment Cartridge (S)					4373502
GAC Carbon Cartridge (GAC)					4373503
Carbon Block Cartridge (CB)					4373504
SFC Flow Control (Red Tubing)					4373500
Filtration Assembly Cover					4373509
Storage Tank					4373511
Air Gap Faucet					4373522
Refrigerator Hook-up Kit					4373505
Additional Parts				%” Tubing	4319151
Needed For Multiple					4319152
Connections:		“T”Connector with		Push-in Ends
% Rejection Monitor					4373512

3.Disconnect orange tubing from filtration assembly. Connect orange tubing to tank sanitizing kit’s other push-in connector.

4.Put M ieaspoon of bleach into tank sanitizing kit.

5.Turn on saddle valve in water line. Allow storage tank to fill for about 3 minutes. Turn off saddle valve in water line and the valve at the top of storage tank.

6.Wait 15 minutes. Disconnect tank sanitizing kit

from storage tank. Disconnect the orange tubing from the tank sanitizing kit.

7.Reconnect orange tubing to filtration assembly. Reconnect yellow tubing to filtration system.

8.Turn on saddle valve in water line and the valve at top of storage tank. Open faucet and drain tank. There will be water dripping when the tank is empty.

9.Allow tank to refill. Wait about 6 hours. Drain tank again and allow it to refill. If water has a taste, drain lank and allow it to refill again.

Preparationfor longperiodsof non-use

Follow these instructions if RO system will not be used for more than 30 days.

1.Turn off saddle valve in water line. Open faucet to drain tank. There will be no water dripping when

tank is completely empty. Wait five minutes for filtration assembly to depressurize.

2.Remove all cartridges. Place cartridges upside- down in sink or bucket to drain water from cartridges. Place cartridges in a plastic bag and seal tightly. Place bag with cartridges in refrigerator. DO NOT allow cartridges to freeze.

Whenyou call, youwill needthe ROwaterfiltrationsystemmodelnumber		Flow	Sensor							4373513
		LED Faucet Base Assembly								4373514
and serial number.Bothnumberscan be foundlabeledon the top rightside
		Installation Instructions								43735008
of the filtrationassembly.
		lme+~llotionKit								4373518
		JLcaIICIL.-..			-.-
HowToArrangeForService...		Tubing Kit								4373519
		%” Green		Tubing		4				4373516
In the eventthat your Whirlpoolapplianceshouldever needservice,call the		Spare	“0” Ring Kit							4374515
dealerfromwhomyou purchasedthe applianceor a Whirlpool-authorized		Drain Saddle Assembly								4373520
servicecompany.A Whirlpool-authorizedservicecompanyis listed in the		Saddle Valve, Self-tapping								4373521
YellowPagesof your telephonedirectoryunder“Appliances-Major-Service		Basement Installation Kit								4373517
or Repair.”Youcan also obtainthe servicecompany’snameand telephone
		Booster Pump								4373525
numberby dialing,free withinthe continentalUnitedStates,the Whirlpool
		Tank Sanitizing Kit								4373527
ConsumerAssistanceCentertelephonenumber,l-800-253-1301.A special
		W Connector			with	Push-in	Ends			4373546
operatorwill tell you the nameand numberof your nearestWhirlpool-
		% “T”Connector with Push-in Ends								4373547
authorizedservicecompany.
		%-l/d Male Connector with Push-in Ends								4373548
Maintainthe quality builtinto yourWhirlpoolappliance-call a Whirlpool-
		%-l/4	Reducing		Connector		with	Push-in	Ends	4373549
authorizedservicecompany.
		l/4 Elbow		Connector		with	Push-in	Ends		4373556
		W Elbow		Connector		with	Push-in	Ends		4373557
MODEL	IV REVERSE OSMOSIS		DRINKING			WATER	TREATMENT		UNIT
MODEL	NO. WSR413YW
REPLACEMENT CARTRIDGE:		WHIRLPOOL			RO FSP# 4373501			WHIRLPOOLS FSP#		4373502
		WHIRLPOOL GAC FSP# 4373503 WHIRLPOOL CB FSP# 437504
SERVICE FLOW RATE - 0.6 gpm (2.26 Ipm)
MAX. OPERATING PRESSURE -100 psig (862 kPa)
MIN. OPERATING PRESSURE - 40 psig (345 kPa)
MAX. OPERATING TEMPERATURE 100°F (36°C)
NOTICE: DO NOT USE WHERE WATER	IS MICROBIOLOGICALLY		UNSAFE		OR WITH WATER OF UNKNOWN QUALITY.

THIS PRODUCT HAS BEEN TESTED AND LISTED UNDER NSF STANDARD 56 FOR TOTAL DISSOLVED SOLIDS, ARSENIC, BARIUM, CADMIUM, CHROMIUM, NITRATE. LEAD, MERCURY, RADIUM, AND SELENIUM REDUCTION. SEE PERFORMANCE DATA SHEET FOR PERMISSIBLE CLAIMS.

NITRATE REDUCTION MODELS (“NITRATE”) ARE ACCEPTABLE FOR TREATMENT OF INFLUENT CONCENTRATIONS		UP
TO 30 mg/L; ADDITIONAL TREATMENT SHALL BE REQUIRED FOR HIGHER INFLUENT LEVELS.
THIS SYSTEM IS NOT CERTIFIED FOR NITRATE REDUCTION IN WATER SUPPLIES WITH A PRESSURE
OF LESS THAN 40 PSI.	NSF@
WHIRLPOOL CORPORATION, BENTON HARBOR, MI, USA.
	0
IT IS ESSENTIAL THAT OPERATIONAL, MAINTENANCE AND FILTER REPLACEMENT REQUIREMENTS
BE CARRIED OUT FOR THE PRODUCT TO PERFORM AS ADVERTISED-*

16