Whirlpool WSR413YW0 manual Whirlpool Reverse Osmosis Water Filtration System, Model No. WSR413YW

This Reverse Osmosis System has been tested and listed by NSF International

PerformanceDataSheet @ Q under Standard 58 for the water treatment claims listed below under “Contaminant Reduction Performance”.

Whirlpool Reverse Osmosis Water Filtration System IV

Model No. WSR413YW

Purification Assembly Components Sediment Prefilter: 5 micron Nominal Depth

Cartridge

Carbon Prefilter: Activated Carbon

Membrane Type: Thin Film Composite (TFCM)

Carbon Postfilter: Activated Carbon

General Performance Testing Laboratory’

System Production: 10.3 gal/day (39 liters/day)

Minimum TDS Reduction: 96%

‘Raed at 50 psi, 77°F. 750 mg/L N&I, product to storage tank.

Standard Tank Capacity: 2.6 Gallons maximum. Factory sanitized and ready to install.

Reject Water: This drinking water appliance has a self cleaning feature that requires approximately

3 gallons of rinse water for every gallon of high quality water used.

Factory Specifications**

Membrane Production: 14-20 gal/day High- Flow Membrane

Membrane TDS Reduction: 96% Minimum

“Rated at 60 psi, 77°F. 350+ mglL TDS, product lo atmosphere.

Note: Actual produtiion rate and TDS reduction will depend upon temperature. water pressure. TDS level, membrane variation and usage pattern.

Test Parameters

TDS = 200500 mg/L2 pH = 7.5 Turbidity = 1 NTU Temperature = 77°F Pressure = 50 psig

‘USEPA Maximum Contaminanl Level or Action Level (mg/L). 3arrium. Cadmium and Chromium were tested at 750 mglL TDS.

3The reduction of Radium was verified by using Barium as a surrogate under NSF prolocol.

‘These conlaminanls are not necessarily in your water supply. Periormance may vary based on local water conditions

In addilion to the contamlnanls listed above. these systems also have Ihe ability to effectively reduce non health-related chemicals llke Chlorides, Phosphate, Sodium and Sulfates

I

APPLICATION

GUIDELINES/SPECIFICATIONS

AND

FEATURES

Membrane

TvDe

1

TFCM

I

Water

SUDDIV Parameters

Water

Supply-Community

Chlorinated

Chemical

Limit

I

or Pnvate

Well

Onlv

I

Hardness

~350

ma/L

Water

Pressure

1 40-l

00 psi (3-7 Kg/cm2)

1

Iron

1

co.1

mg/L

I

Water Temperature

1

40”-100°F

(4.4 - 36°C)

1

Manganese

co.05

mg/L

DH Ranoe

4-11

I

Hvdroaen

Sulfide

I

0

I

Maximum

TDS

Level

I

2000 ppm

I

Turbidity

I

cl

NTU

I

CAUTION:

Da

Not

usa

where water

is

microbiologically

unsaie

or with

water

of unknown

quality

Waler supplies

that

exceed limits lor

Hardness,

Iron,

Manganese.

Hydrogen

Sulfide require

pretreatment.

Important Quality Assurance Requirements

IThis Reverse Osmosis Drinking Water system contains treatment components that are critical for effective reduction of Total Dissolved Solids as well as inorganic contaminants.

A water quality monitor (indicator light disk) is build into the system to provide the user with a means to test the water at any time. Refer to “Useand Care Information” for operation of the water quality monitor (indicator light disk).

Routine Maintenance

Sediment Prefilter, Carbon Prefilter and Carbon Postfilter: Change once per year’

Membrane: Change as required based on the built-in water quality monitor.

*Refer to “Use and Care Inlormation” for additional conditions.

All Drinking Water Appliances are factory tested, sanitized and prepared for installation.

WARRANTY

Length		of	Warranty:			Whirlpool will pay		for:
One	Year		Full	Warranty		Replacement	parts	and repair labor		to correct defects
(from	date		of	purchase)		in materials	or workmanship		for the	entire	product
						except for the filter cartridge(s). Servicing must be
						provided by an authorized Whirlpool servicing outlet.
Five	Year		Limited		Warranty	Replacement	parts	to correct	defects	in materials or
(second		through			fifth year	workmanship	for the entire product except				for the
from	date		of purchase)			filter cartridge(s).

Whirlpool will not pay for: A. Service calls to:

1.) Correct the installation of the product. System must be installed and operated in accor- dance with Whirlpool procedures and guidelines.

2.) Instruct you how to use the product.

3.) Correct house plumbing.

El. Repairs when product is used in other than normal, single-family household use.

C. Repairs when product is damaged from neglect, misuse, abuse, freezing or hot water, fouling with sediment or scale, bacterial attack, alterations, improper installation, or installation not in

accordance with local plumbing codes.

D. Any labor costs during the limited warranty.

E. Replacement parts or repair labor costs for units operated outside the U.S. F. Pickup and delivery. This product is designed to be repaired in the home.

G. Repairs to parts or systems caused by unauthorized modifications made lo the product.

The performance and functioning of your water filtration system is directly related to the quality of the water being treated and the particular application in which it is used. Please consult “Water Requirements” and “Use& Care”.

Whirlpool shall not be liable for Incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

17