White
4400
User’s Manual
Mode Indicators
—
SELECT
cD POSITION
D INTERNAL
‘D CARD
N
The machine has modes for specific operations. Following are descriptions of the active mode when the LED lamp is lit beside these titles on your machine’s display.
Select - You may select patterns to embroider. When this mode is lit, you may use the left and right Directional keys move through the individual designs in memory or on an inserted memory card. Up and down Directional keys move forward and backward by ten designs at a time.
Position - This light is displayed after design selection. You may position the hoop to a starting point other than center. The Directional keys move the hoop in the direction indicated by the arrow.
Internal - This lamp is lit whenever you are working from internal memory.
Card - This lamp is lit whenever you are working from an inserted memory card
