ENTERING YOUR PROGRAM

Follow these steps to enter the heating/cooling program you have selected.

We recommend that you remove the thermostat from the wall for programming (especially for entering cooling programming). Fresh “AA” Ener- gizer® alkaline batteries must be installed to per- form off-wall programming. BE SURE SYSTEM

SWITCH IS SET TO OFF POSITION BEFORE REATTACHING THERMOSTAT TO SUBBASE!

Set Current Time and Day

1.

Press CLOCK once. The display will show

 

SET

 

minutes only.

 

EXAMPLE:

2.

Press and hold either TIMEFWD or BACKTIME until you

 

reach the correct minutes.

3. Press SET once. The display window will

CLOCK

show the hour only.

EXAMPLE:

4. Press and hold either TIMEFWD or BACKTIME until you reach the correct hour and AM/PM designa- tion (AM begins at midnight; PM begins at noon).

5.Press CLOCKSET once. The display will show the day of the week as an abbreviation (MON for Monday, TUE for Tuesday, etc.).

6. Press and hold either TIMEFWD or BACKTIME until you reach the current day of the week.

22

Page 22
Image 22
White Rodgers 1F97W-51 manual Entering Your Program, Set Current Time and Day