Program Cooling Temperatures
!CAUTION
If outside temperature is below 50°F, we recommend that you remove the ther- mostat from the wall before proceeding with the following steps to program cool- ing temperatures. Personal injury and/or property damage could result from air conditioner compressor slugging. Fresh “AA” alkaline batteries (such as Ener- gizer® brand) must be installed to per- form
SURE TO PRESS | SYSTEM | UNTIL OFF IS |
HEAT - OFF - COOL |
DISPLAYED BEFORE REATTACHING THE THERMOSTAT TO THE SUBBASE!
1.To program cooling temperatures for the heating/cooling periods you have already
set, press | SYSTEM | until COOL is displayed. |
HEAT - OFF - COOL |
2. Press VIEW once. The Monday heating/
PRGM
cooling period 1 start time you programmed earlier will be displayed, along with the currently programmed COOL A, B, C, or D temperature.
3.Press 
or 
to display the COOL A, B, C, or D temperature you want for Monday’s heating/cooling period 1. If you want the fan to run continuously during this period, press
ON - AUTO | until PRG FAN is displayed. |
| |
FAN |
|
|
|
4. Press | PRGMVIEW , then press | or | to |
select Monday’s COOL A, B, C, or D tem- perature for period 2. If you want the fan to
27
