Windsor 230V, 240V Maintenance, Squeegee Assembly, Squeegee Deflection, Page 10of, Squeegee wear

TRIDENT COMPACT 17" 230V/240V

MAINTENANCE

SQUEEGEE

ASSEMBLY

Before and during useof machine, use a damp clothto wipe the outside and inside of squeegee to remove buildup of foreign material on the squeegee blades. This prevents streaking and residue on the floor.

Squeegee wear:

After extended use, the squeegee blades will wear. To improvesqueegee performanceand extend wear, pro- ceed as follows:

1.Turn off all switches and place the machine on a level surface. Raisethe squeegee to the transport position.

2.Loosen knobs on the left and right hand sides of squeegee until squeegee can be removed from the squeegee bracket.

3.Loosen the fasteners on front of squeegee to replace or adjust front blade.

4.Unlatch rear squeegee latch to replace rear blade.

Adjusting SqueegeeAssembly

1.Lower the squeegee and move the machine forward.

2.Obsetve the level of the squeegee for an even curl along the length of the blade. Use camber adjustment knob to achieve even curl if required.

3.Adjust the down pressure nut located on squeegee mounting assembly. Do not apply excessiveforce.

Page 10of 27

SQUEEGEE DEFLECTION

INCORRECT

I NOTENOUGH I

L1 TOOMUCH

TCE2O-IF 98481 7/1\87