Windsor 10080170, ADM8 operating instructions Operations, Correct Incorrect

1/8in (3mm)

CORRECT

INCORRECT

STEP

1

STEP

2

STEP

3

OPERATIONS

Remove electrical cord and literature from recovery tank. Fill solution tank (see filling instructions page 3-5).

Plug cord into grounded outlet. Note: Be sure dome is seated on recovery tank, and float shut-off is installed correctly.

Adjust brush to proper setting. Note: For good operation the brush must skim the carpet. If circuit breaker trips raise brush to prevent damage to motor or carpet.

SOLUTION BRUSH VACUUM

INTONON

CONT

STEP

4

Turn on brush and vacuum motor switches (“ON”=“I”). Turn on solution switch for continuous spray or set switch to intermittent to allow use of trigger switches.

ADMIRAL 86038230 03/16/07 3-6