1ft.
(30cm)
OFF
STEP
1
STEP
2
CLEANING PROCEDURE
Start at wall closest to power outlet. Pull straight back without pushing down on handle.
Release intermittent trigger switches or turn off continuous setting on solution switch approximately 1 foot before ending cleaning pass.
1in.
(25mm)
STEP
3
Push down on handle to raise vacuum shoe and brush before moving to the next cleaning pass. Overlap brush contact area approximately 1inch.
SOLUTION
INTAKE COVER
VACUUM
INTAKE COVER
STEP
4
During operation, observe the following: The Admiral is equipped with clear internal covers to facilitate operator viewing of dirty solution and vacuum air flow.
During operation, observe the vacuum intake cover. Large amounts of water or foam entering the vacuum system can damage the vacuum motor. If you notice either condition, shut down the machine immediately. Empty recovery tank and/or add defoamer to recovery tank.
ADMIRAL 86038230 03/16/07 |
