OPERATIONS
1/8in 
(3mm)
CORRECT
INCORRECT
STEP
1
STEP
2
STEP
3
Remove electrical cord and literature from recovery tank. Fill solution tank (see filling instructions).
Plug cord into grounded outlet. Note: Be sure dome is seated on recovery tank, and float
Adjust brush to proper setting. Note: For good operation the brush must skim the carpet. If circuit breaker trips raise brush to prevent damage to motor or carpet.
SOLUTION BRUSH VACUUM
INTONON
CONT
STEP
4
Turn on brush and vacuum motor switches (“ON”=“I”). Turn on solution switch for continuous spray or set switch to intermittent to allow use of trigger switches.
| 86038280 04/04/07 |
