Windsor IM 10066360 Machine Operation Pre-Runinspection, Starting Machine, Operations, 120V only

MACHINE OPERATION

PRE-RUN INSPECTION

Perform a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Check the rating plate to confirm voltage and frequency is the same as the power supply. NOTE: A 10% variation in voltage is acceptable.

STARTING MACHINE

NOTE: Perform pre-run machine check before operating machine.

FOR SAFETY: Before starting machine, make sure that all covers are in place and secured properly.

1.Connect the machine to a power supply.

2.Release the handle lock.

3.(a) Press green button to power on the machine,120V only.

(b)Set black on/off switch to “on” position, 230V only.

4.Press green button to start brushes.

After applying a light spray of diluted interim carpet cleaner onto the carpet using a pressurized tank sprayer, commence cleaning by pushing and pulling the machine slowly over the wetted carpet. Move the machine in multiple directions and overlapping strokes.

For best results use Windsor iCapsol or Prochem ProCaps products.

OPERATIONS

STARTING MACHINE – DELUXE

NOTE: Perform pre-run machine check before operating machine.

FOR SAFETY: Before starting machine, make sure that all covers are in place and secured properly.

1.Connect the machine to a power supply.

2.Release the handle lock.

3.(a) Press green button to power on machine,

120V only.

(b)Set black on/off switch to “on” position, 230V only.

4.Press green button to start brushes.

5.Press and hold blue button to spray chemical. Once machine is plugged in spray function is operational.

Apply a light spray of diluted interim carpet cleaner onto the carpet using the onboard spraying system. Spray chemical while pushing the machine forward. Brush the chemical into the carpet while pulling the machine slowly over the wetted carpet. Move the machine in multiple directions and overlapping strokes.

For best results use Windsor iCapsol or Prochem ProCaps products.

!

Flammable materials can cause an explosion or fire. Do not use flammable materials with this machine.

86269870 08/20/08 3-3