![](/images/new-backgrounds/1125306/1253067x1.webp)
Introduction/How Does Digital Satellite TV Work?
Introduction
Congratulations! You have an RV automated digital satellite reception product —
How Does Digital Satellite System TV Work?
Satellite programming originates from an “uplink” fa- cility on Earth — the facility receives many signals from different sources, combines the signals digitally and transmits to the satellites. The satellites (22,300 miles above Earth) receive the uplink signal, amplify it and then transmit it back to earth in the Ku fre- quency band. This signal is received by your satellite antenna whose shape reflects and concentrates the signal to the LNBF* attached to
the antenna. The LNBF is lo- cated at the “focal point” of
signal reflection, that is, the point at which the maximum amount of signal is effectively concentrated.
The LNBF amplifies and converts the signal to the 950 to 1450 MHz range. The signal is then passed through a coaxial cable to the electronics box, then to the receiver where individual channel selection and processing take place.
* Low Noise Block Converter Feed
UPLINK SIGNAL
PROGRAMMING UPLINK
CONTROL CENTERS
For Programming information call:
DISH NETWORKTM -
ExpressVu -
Your new Winegard RV Digital Satellite System is an
DIGITAL BROADCAST
SYSTEM SATELLITE(S)
HIGH POWER
DOWNLINK SIGNAL
WINEGARD AUTOMATIC
DIGITAL SATELLITE
SYSTEM ANTENNA
WINEGARD
SENSAR® ANTENNA
TELEVISION SET
RECEIVER
4