Manuals / Wolf / Kitchen Appliance / Range

Wolf C72SS operation manual LEG/CASTER Assembly, Leveling, GAS Pressure Regulator

Models: C72SS

1 20
Download 20 pages 31.63 Kb
Page 5
Image 5

LEG/CASTER ASSEMBLY

The range is shipped fully assembled, except for the legs. The range is provided with four 6"(152 mm) adjustable stainless steel legs (hardware included), packaged in a box located inside of the oven. A set of four 6"(152 mm) casters are available as an optional field installable accessory.

Installation of legs/casters:

1.Carefully tip range on its side.

2.Align holes in leg/caster mounting plate with pre-drilled holes in bottom of range located in each corner.

3.Attach mounting plate to bottom of range using four ¼ - 20 x ⅝“ self tapping screws (provided). If casters are being installed, the two locking casters should be mounted on the front.

4.After all four legs/casters have been installed, carefully return the range to its upright position.

(For additional leg information, see Leveling section of this manual).

Ranges mounted on casters must use a flexible connector (not supplied by Wolf) that complies with the Standard for Connectors for Movable Gas Appliances, ANSI Z21.69•CSA 6.16 and a quick-disconnect device that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI Z21.41•CSA 6.9. In addition, adequate means must be provided to limit movement of the appliance without depending on the connector and the quick-disconnect device or its associated piping to limit appliance movement. Attach the restraining device at the rear of the range.

If disconnection of the restraint is necessary, turn off the gas supply before disconnection. Reconnect this restraint prior to turning the gas supply on and returning the range to its installation position.

If the range is installed on casters and is moved for any reason, it is recommended that the range be re-leveled front to back and side to side for even baking.

LEVELING

To level the range, place a carpenter's level on the range top and check leveling of the unit side to side and front to rear. Achieve leveling by turning each foot section of the unit's leg as needed. Turning the foot in a counter clockwise direction will increase height and clockwise will decrease.

GAS PRESSURE REGULATOR

A preset gas pressure regulator and street elbow is shipped attached to the gas inlet of the range. This regulator must be installed by an authorized service person before the unit is placed into operation. See unit data plate, riveted inside the lower front kick panel, for pressure regulator setting information.

1.Locate the ¾" (19 mm) NPT gas connection pipe protruding through the back of the unit.

2.Cover the pipe threads with pipe joint compound resistant to propane gases.

3.Screw the regulator onto the pipe hand tight with flow direction arrow pointing towards the back of the unit and the regulator adjustment in the up right position.

4.With a pipe wrench, tighten the regulator securely in the upright position. (The regulator is preset and should not require any additional adjustments.) The pressure regulator must be mounted

-5 -

Page 4 Page 6
Page 5
Image 5
Wolf C72SS operation manual LEG/CASTER Assembly, Leveling, GAS Pressure Regulator
Page 4 Page 6

C72SS specifications

The Wolf C72SS is a remarkable addition to the culinary landscape, where luxury meets high-performance in kitchen appliances. Designed for those who refuse to compromise on quality, the C72SS is a professional-grade range that embodies the spirit of Wolf’s commitment to exceptional cooking.

One of the standout features of the Wolf C72SS is its powerful dual-stacked, sealed burners. With a variety of heat outputs, ranging from a gentle simmer to intense high heat, these burners cater to diverse cooking techniques. The precise flame control enables chefs to achieve the perfect results every time, whether they’re sautéing vegetables or searing meats.

Another significant highlight is the spacious 36-inch convection oven. The C72SS’s oven is equipped with advanced convection technology that ensures even heating and faster cooking times. With multiple rack positions, users can easily accommodate larger dishes or multiple trays, making it ideal for holiday feasts or family gatherings. The oven also includes a self-cleaning feature, simplifying maintenance for busy cooks.

The design of the Wolf C72SS reflects both functionality and elegance. The stainless steel finish not only provides a sleek and professional look but also makes the appliance easy to clean. With ergonomic handle designs and intuitive control knobs, navigating through various settings becomes a seamless experience.

Moreover, the C72SS integrates advanced temperature management features. The infrared broiler delivers consistent results, perfect for caramelizing or browning dishes to perfection. In addition, the oven is fitted with high-performance baking settings, enhancing the capabilities of the home baker.

Safety is also a key consideration in the Wolf C72SS design. With integrated flame failure safety devices and heavy-duty construction, users can cook with confidence, knowing they are equipped with a reliable appliance.

Overall, the Wolf C72SS is not just an appliance; it is a cooking companion that elevates culinary endeavors. With its combination of powerful burners, spacious convection oven, user-friendly design, and safety features, it epitomizes the essence of professional cooking at its finest. Whether you are a home cook or a seasoned chef, the Wolf C72SS promises to deliver unparalleled performance and precision in every dish.