Wolf ICBCT15G Wolf GA S CO O K to P S S TA L LAT I on Specifications, Model ICBCT36G Dimensions

WOLF GA S CO O K TO P S

I N S TA L LAT I ON SPECIFICATIONS

The illustrations below provide the overall dimensions, countertop cut-out and installation specifications for Model ICBCT36G.

IMPORTANT NOTE: 991 mm wide cabinets are recommended for installation of Model ICBCT36G.

AWolf 914 mm built-in oven may be installed below Model ICBCT36G. For this installation, unless you are using cabinets deeper than 610 mm, it is recommended that the electrical and gas supply be placed in the base cabinet to the right of the oven. Refer to installation instruc- tions provided with the built-in oven for addi- tional specifications.

If the Model ICBCT36G is installed above cabinets, the gas and electrical placement is not critical. A grounded outlet needs to be placed within 1.2 m of the right rear of the cooktop.

When a 914 mm built-in oven is installed below Model ICBCT36G, it is recommended that the rough opening for the oven be 197 mm from the floor to ease the use of the oven door.

IMPORTANT NOTE: When multiple cooktop units are installed side by side, refer to the countertop cut-out dimensions on page 11.

INSTALLATION SPECIFICATIONS – MODEL ICBCT36G

	533 mm
	OVERALL
	DEPTH
914 mm
OVERALL WIDTH
	102 mm
Overall Dimensions
MODEL ICBCT36G
DIMENSIONS
Overall Width	914 mm
Overall Height	102 mm

330 mm
		max
64**		489 mm
mm
	COOKTOP CUT-OUT
		DEPTH
		610 mm min

457 mm

64mm

min

914 mm

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

				991 mm
			762 mm
229 mm*min		RECOMMENDED CABINET WIDTH
				914 mm min	COUNTERTOP TO
CUT-OUT TO				889 mm		COMBUSTIBLE
COMBUSTIBLE						MATERIALS
	MATERIALS		COOKTOP CUT-OUT WIDTH		ABOVE COOKTOP
(BOTH SIDES)

102 mm

89 mm E G

95 mm	254
min
	mm
914 mm OVEN OPENING

Overall Depth	533 mm
Recommended
Cabinet Width	991 mm
Minimum Cabinet Depth	578 mm
Minimum Height Clearance	102 mm
Cut-Out Width	889 mm
Cut-Out Depth	489 mm

Unit dimensions may vary to ± 3 mm.

*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 457 mm above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 457 mm above countertop.

		889 mm
Countertop Cut-Out		COOKTOP CUT-OUT WIDTH
			489 mm
	64 mm		COOKTOP
			CUT-OUT DEPTH
	min

FRONT OF COUNTERTOP

10