I N S TA L L AT I O N I N S T RU C T I O N S

B E F O R E YOU START

Check the location where the cooktop will be installed. The location should be away from strong draft areas, such as windows, doors and strong heating vents or fans. Do not obstruct flow of combustion and ventilation air.

This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in accor- dance with current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation.

This cooktop is intended for indoor use.

S I T E PREPARATION

COUNTERTOP CUT- OUT DIMENSIONS

IMPORTANT NOTE: Countertop opening dimensions shown on the following pages must be used. The dimensions shown provide for required clearances.

These cooktops are designed to fit a standard 610 mm deep base cabinet with a 635 mm deep countertop. Before making the counter- top cut-out, verify that the cooktop will clear the side walls of the base cabinet below. There should be at least 140 mm clearance between the countertop and any combustible surface directly below the unit.

IMPORTANT NOTE: Do not seal the cooktop to the countertop. It must be removed if service is necessary.

LOCATION REQUIREMENTS

Illustrations on the following pages provide the overall dimensions, countertop cut-out and installation specifications for Wolf gas cooktops. Maintain the following minimum installation dimensions:

Minimum horizontal clearance from the sides and back of the cooktop cut-out to adjacent vertical combustible construction, extending a minimum of 457 mm above the countertop, is as follows: 178 mm from side edges of cut-out for the 381 mm cooktop;

229mm from side edges of cut-out for the

762mm and 914 mm cooktops; 64 mm from rear edge of cut-out.

Minimum vertical distance between the countertop and combustible materials above the cooktop must be 762 mm.

Maximum 330 mm depth of overhead side cabinets directly above and within side clearance.

IMPORTANT NOTE: When installing a ventila- tion hood, refer to the specific requirements of the hood for the minimum dimension to countertop.

Failure to locate the cooktop without the proper clearances will result in a fire hazard.

7

Page 6 Page 8
Page 7
Image 7
Wolf ICBCT15G S TA L L AT I O N I N S T RU C T I O N S F O R E YOU Start, T E Preparation, Countertop CUT- OUT Dimensions
Page 6 Page 8

ICBCT15G specifications

The Wolf ICBCT15G is a state-of-the-art infrared heating appliance that is primarily utilized in various residential and commercial heating applications. Known for its sleek design and innovative technology, the ICBCT15G is engineered to deliver exceptional energy efficiency while providing reliable warmth in any environment.

A standout feature of the Wolf ICBCT15G is its advanced infrared heating technology. Unlike traditional convection heaters that warm the air, infrared heaters directly warm the objects and surfaces in a room. This results in faster heating times and reduced energy consumption, making it an environmentally friendly option. The ICBCT15G efficiently converts electricity into infrared radiation, ensuring heat is distributed evenly and quickly throughout the space.

Another significant characteristic of the ICBCT15G is its smart control capabilities. It is equipped with a user-friendly digital interface that allows users to adjust temperature settings and heating schedules with ease. Additionally, the appliance can be integrated into smart home systems, enabling remote operation via mobile apps. This feature enhances user convenience and encourages energy-saving practices by allowing the unit to be scheduled to operate only when needed.

The ICBCT15G also boasts a compact and lightweight design, making it easy to install and relocate as needed. It can be mounted on walls or ceilings, providing flexibility in placement while maximizing floor space. The unit's modern aesthetic ensures that it seamlessly blends into any decor, making it an attractive addition to any home or office.

Safety features are paramount in the design of the Wolf ICBCT15G. It is equipped with advanced overheating protection, ensuring that the appliance automatically shuts off if it exceeds safe temperature limits. Additionally, the heater features a cool-touch surface, minimizing the risk of burns, which is particularly valuable in environments with children or pets.

In conclusion, the Wolf ICBCT15G is a powerful and efficient infrared heating solution that stands out due to its innovative technology, user-friendly controls, attractive design, and comprehensive safety features. Ideal for a wide range of applications, it provides not only warmth but also energy savings and convenience, making it a top choice for those seeking a reliable heating solution.
Top Page Image Contents