I N S TA L L AT I O N I N S T RU C T I O N S

S U R FA C E B U R N E R S

INITIAL LIGHTING

The surface burners use electronic igniters in place of standing pilots. When the cooktop control knob is pushed in and turned to the position, the system creates a spark to light the burner. This sparking continues until the electronic ignition senses a flame. If the burner fails to ignite after 10 seconds, return

the knob to the position and attempt to ignite by turning the knob back to the position.

Be sure to place the burner heads and caps on each burner base and position the burner grates over the burner bases and heads before lighting.

To check operation of the surface burners, push in and turn each control knob to the position. The flame should light within four seconds.

If the burners do not light properly, turn

control knob to the position. Check that the burner heads and caps are in the proper position. Check that the power supply cord is plugged in and that the circuit breaker or house fuse has not blown. Check operation again, if the burners do not light properly at this point, contact a Wolf authorized service center.

IMPORTANT NOTE: Initial lighting of the surface burners may take slightly longer, as air in the system must be purged before gas can be supplied to the burner.

CO O K TO P REMOVAL

If it is necessary to remove the cooktop for cleaning or service, shut off the gas supply. Disconnect the gas and electric supply.

Remove the mounting brackets on the right and left side of the burner box and remove the cooktop. Reinstall in the reverse order and check the gas connection for leaks.

T R O U B L E SHOOTING

IMPORTANT NOTE: If the cooktop does not operate properly, follow these troubleshooting steps:

Verify that power is being supplied to the cooktop.

Check that gas valves are turned to the ON position.

Check the gas supply and electrical connections to ensure that the installation has been completed correctly.

Follow troubleshooting procedures as described in the Wolf Gas Cooktops Use & Care Information.

If the cooktop still does not work, contact a Wolf authorized service center. Do not attempt to repair the cooktop yourself. Wolf is not responsible for service required to correct a faulty installation.

15

Page 15
Image 15
Wolf ICBCT15G installation instructions Initial Lighting, CO O K to P Removal, O U B L E Shooting

ICBCT15G specifications

The Wolf ICBCT15G is a state-of-the-art infrared heating appliance that is primarily utilized in various residential and commercial heating applications. Known for its sleek design and innovative technology, the ICBCT15G is engineered to deliver exceptional energy efficiency while providing reliable warmth in any environment.

A standout feature of the Wolf ICBCT15G is its advanced infrared heating technology. Unlike traditional convection heaters that warm the air, infrared heaters directly warm the objects and surfaces in a room. This results in faster heating times and reduced energy consumption, making it an environmentally friendly option. The ICBCT15G efficiently converts electricity into infrared radiation, ensuring heat is distributed evenly and quickly throughout the space.

Another significant characteristic of the ICBCT15G is its smart control capabilities. It is equipped with a user-friendly digital interface that allows users to adjust temperature settings and heating schedules with ease. Additionally, the appliance can be integrated into smart home systems, enabling remote operation via mobile apps. This feature enhances user convenience and encourages energy-saving practices by allowing the unit to be scheduled to operate only when needed.

The ICBCT15G also boasts a compact and lightweight design, making it easy to install and relocate as needed. It can be mounted on walls or ceilings, providing flexibility in placement while maximizing floor space. The unit's modern aesthetic ensures that it seamlessly blends into any decor, making it an attractive addition to any home or office.

Safety features are paramount in the design of the Wolf ICBCT15G. It is equipped with advanced overheating protection, ensuring that the appliance automatically shuts off if it exceeds safe temperature limits. Additionally, the heater features a cool-touch surface, minimizing the risk of burns, which is particularly valuable in environments with children or pets.

In conclusion, the Wolf ICBCT15G is a powerful and efficient infrared heating solution that stands out due to its innovative technology, user-friendly controls, attractive design, and comprehensive safety features. Ideal for a wide range of applications, it provides not only warmth but also energy savings and convenience, making it a top choice for those seeking a reliable heating solution.