W O L F P RO V E N T I L AT I O N HOOD LINERS
INSTALLATION S P E C I F I C AT I O N S
The illustration and chart below provide dimensions critical for proper installation of the Pro hood liner.
B
HEIGHT OF
TRANSITION
TO CENTER
OF TRANSITION
D 
C
TO CENTER
OF TRANSITION
A
WIDTH OF
HOOD LINER
Pro Hood Liners |
|
|
| |
Model | (A) | (B) | (C) | (D) |
|
|
|
|
|
L342212 | 34 3/8" (873) | 9 3/8" (238) | 17 3/16" (437) | 6" (152) |
L402212 | 40 3/8" (1026) | 9 3/8" (238) | 20 3/16" (513) | 6" (152) |
L462212 | 46 3/8" (1178) | 9 3/8" (238) | 23 3/16" (589) | 6" (152) |
L522212 | 52 3/8" (1330) | 9 3/8" (238) | 26 3/16" (665) | 6" (152) |
L582212 | 58 3/8" (1483) | 9 3/8" (238) | 29 3/16" (741) | 6" (152) |
DECORATIVE H O O D S
A decorative hood can be created out of wood, plaster, tile or metal. The shape of the decora- tive hood is not critical. The only place where the hood liner and outside cover must meet is at the bottom edge of the liner. The decorative hood and liner must fit at the bottom edge in both width and depth.
The height of the hood liner does not have to be the same as the height of the decorative hood and is generally shorter.
The top depth of the hood liner, which is 12"
(305)standard, must be less than the interior depth of the decorative hood. Measure the interior depth of the hood at the top height of the liner to make sure the liner will fit inside the decorative hood.
The hood liner comes standard with a 4" (102) lower reveal. Be sure to include this dimension in your decorative hood selection.
Always use the interior measurements of the decorative hood and measure in multiple places. Use the smallest dimensions to verify hood liner specifications.
Letters correspond to those in the illustration.
6
