Wolf Appliance Company L462212, L582212, L342212, L522212 Installation I N S T R U C T I O N S

INSTALLATION I N S T R U C T I O N S

HOOD LINER P R E PA R AT I O N I N S TA L L T H E HOOD LINER

If you are installing an in-line or remote blower, drill a 7/8" (22) hole through the wood framing for the conduit. Refer to the in-line and remote blower information on pages 12–13 and follow installation instruc- tions provided with the blower.

IMPORTANT NOTE: Do not run wiring for the remote blower through the ductwork.

Dimensions in parentheses are in millimeters unless otherwise specified.

IMPORTANT NOTE: If a backsplash is to be used, it should be installed before the hood liner is mounted.

Position the hood liner in the desired location on the wall. Install the #10 x 2" (59) screws through the mounting holes on the back plate. Verify that the screws engage the wall studs or framing. If not, wall anchors must be used.

IMPORTANT NOTE: If additional support is required for the hood liner, drill supplementary mounting holes in the back plate and use these holes to attach the hood liner assembly to the wall framing.

Due to the weight of the hood liner, be sure to have adequate manpower for installation.

9