Wolf Appliance Company L462212, L582212, L342212, L522212, L402212 L I S T O F M At E R I A L S

W O L F P RO V E N T I L AT I O N HOOD LINERS

INSTALLATION R E Q U I R E M E N T S

L I S T O F M AT E R I A L S

The following is a list of materials shipped with the Wolf Pro ventilation hood liner.

INSTALLATION C O N S I D E R AT I O N S

IMPORTANT NOTE: Wolf Pro ventilation hood liners are recommended for use with all Wolf cooking appliances and are available to accom- modate 36" (914), 42" (1067), 48" (1219), 54" (1372) and 60" (1524) wide hoods.

A C C E S S O R I E S

Optional acces- sories are available through your Wolf dealer. To obtain local dealer information, visit the Locator section of our website, wolfappliance.com.

Stainless steel hood liner

Transition with backdraft damper (attached inside hood liner—needs to be removed)

Filters (installed in hood liner)

Installation package (taped to filters) includes:

(8)#10 x 2" (51) Phillips head wood screws

(8)#10 washers

(4)hollow wall anchors

Installation Instructions

Use & Care Information and product registration card

Proper installation is the responsibility of the installer. Product failure due to improper installation is not covered under the Wolf Warranty. Refer to the Wolf Pro Ventilation Hoods Use & Care Information for warranty details, or visit the Contact/Help section of our website, wolfappliance.com.

Make sure you have the tools and materials necessary for proper installation.

Any required service must be performed by a Wolf authorized service center. Wolf is not responsible for service required to correct a faulty installation.

IMPORTANT NOTE: Wolf Pro ventilation hood liners are shipped without the blower assembly. Wolf internal, in-line and remote blower assemblies are available, refer to page 14. Use only a Wolf blower with the Pro hood liner

IMPORTANT NOTE: Wolf recommends that the Pro ventilation hood liner be installed 30" (762) to 36" (914) above the countertop.

E L E C T R I C A L R E Q U I R E M E N T S

Wolf Pro ventilation hood liners require a separate, grounded 110/120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker. Locate the electrical supply within the shaded area shown in the Installation Specifications illustration on

the following page.

You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.

4