Wolf Warming Drawers | 3 |
Warming Drawer Installation
IMPORTANT NOTE: This installation must be completed by a qualified installer or Wolf factory certified service.
Read this entire installation guide prior to installation and save for the local inspector’s reference. The homeowner should keep this installation guide for future reference.
IMPORTANT NOTE: The warming drawer must be installed with a Wolf stainless steel or integrated drawer front.
This appliance must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. The correct voltage, frequency and amperage must be supplied to the appliance from a dedi- cated, grounded circuit which is protected by a properly sized circuit breaker or time delay fuse. The proper voltage, frequency and amperage ratings are listed on the product rating plate.
Record the model and serial numbers before installing the warming drawer. Both numbers are listed on the product rating plate, located on the left front floor area of the inner cabinet. To access the rating plate, the drawer must be fully open. Refer to the illustration below.
RATING |
PLATE |
Location of rating plate.
wolfappliance.com/specs
Wolf Warming Drawer
Model Number
Serial Number
