Wolfgang Puck BBLFP001 Know Your Blender/Food Processor, Before Your First Use

Know Your

Blender/Food Processor

Blender Jar &

Base

Food Processor Gearbox
Work Bowl	Food Processor
	Cover with
	Feed Tube

Motor base

Food

Pusher

	Stem Adapter for
Filler Cap	Slicer / Shredder
	Disc

Blender Lid
Stainless Steel	Reversible Slicing /
Chopping Blade	Shredding Disc

Before Your First Use

Wash all parts, except motor base and food processor gearbox, in warm soapy water. Never immerse motor base or gearbox in water as this will damage the unit.

Assembling

Your Blender

1For safety purposes your blade assembly is designed to not fully remove from your blender jar.

2Your blender lid is designed to defeat operation of the blender unless the lid is properly in place. You will notice three tabs on your blender lid, and two tabs on your blender jar. The straight tab on the blender lid is used to engage the safety interlock in the handle (Figure 1). Place the blender jar in front of you with the handle facing to the right. Place the lid on the jar with the lid tabs to the left of the tabs on the glass. Turn the lid counter clockwise until the straight tab is fully engaged in the handle interlock above the handle and you cannot turn the lid any further.

3Place the filler cap into the lid and place the blender jar on the motor base with the handle facing to the right of the control panel. This will engage the safety activator pin as referenced in Figure 2.

4Plug the blender into a 120-volt 60 Hz AC only outlet. Your blender is now ready for use.

5Before removing the blender jar from the motor base after use, always unplug the unit first and make sure all lights on the control panel are out.

	Figure 1	Figure 2
Jar Locking Tab	Safety Interlock Tab	Safety Activator Pin

5 6