HSN_7CupFoodProcManual 4/20/09 10:50 AM Page 15
Storing Your Food Processor
| figure 8 | The Wolfgang Puck Food Processor was | |
| designed so that all attachments can be stored | ||
|
| ||
|
| within the unit itself. | |
|
| Storage Drawer | |
|
| The Processing Blade, Reversible Shredding | |
|
| Disc, Reversible Grating and Shaving Disc and | |
|
| Spatula are all stored in the storage drawer. | |
|
| (The Spindle and Variable Slicing Disc are | |
|
| stored in the Processing Bowl. See next page.) | |
|
| ||
| figure 9 | 1 | Remove the storage drawer from the base |
| |||
|
| of the food processor. | |
|
|
| |
|
| 2 | Place the elevated end of the Processing |
|
|
| Blade toward the front of the storage |
|
|
| drawer as indicated in figure 8, and |
|
|
| press down. |
|
| 3 | Place one of the Reversible Discs in |
|
|
| storage drawer as indicated in figure 9. |
|
| 4 | Lie spatula on top of Reversible Disc in the |
| figure 10 | ||
|
| storage drawer as indicated in figure 10. | |
|
| 5 | Place the remaining Reversible Disc in |
|
|
| storage drawer as indicated in figure 11. |
|
| 6 | Your food processor drawer is now |
|
|
| properly assembled, as shown in figure 12. |
|
|
|
|
| figure 11 |
| figure 12 | |
|
| |||
|
|
|
|
|
Storing Your Food Processor
continued
Processing Bowl storage
1Fit the Processor Bowl and Spindle as detailed previously, in figures 1, 2 and 4.
2Place the Variable Slicing blade over the Spindle, see figure 7, and then fit the processing cover to the processing bowl as previously shown in figure 3.
3Place the food pusher in the feed tube.
Cord storage
The power cord can be stored by pushing it into the back of the motor base.
15 | 16 |
