![](/images/new-backgrounds/1301425/3014253x1.webp)
FCC Certifications
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. ©These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced technician for help.
2
Dear Customer,
Thank you for purchasing the FlashPro 8000.
Before using the FlashPro 8000, you will have to
1 Charge the battery
2 Install FlashPro 8000 Windows 98 USB driver (If you are a Windows 98 user)
3 Keep FlashPro 8000 plugged into the AC adapter/charge while connected to your computer.
4 Check www.Wolverinedata.com to download any update firmware that may offer new features .
Wishing you all the best
The Wolverinedata Team
4
Step 2: To avoid bending the pins, carefully slide the battery into the chassis.
Note: If you are using the
27
Problems | Formatting, and partitioning |
|
|
Solutions | To work in the |
| must be formated to the FAT or |
| Note: Win 2000/ Win XP can not support Format Disk for 32G |
| above Hard Drive. |
| To have the 32G above Hard Disk work on the Win 2000/Win XP, |
| youcan use the included FDisk Application Program to format the HDD. |
Problems | The amount of free HD space on my FlashPro 8000 is different |
| from the PC. |
|
|
Solutions | Run Scandisk to correct the disk platters for defects and also looks for |
| lost clusters that are sometimes created when a program aborts. |
| It is recommended to safely disconnect the FlashPro 8000 ( Refer to |
|
25