59723 Hose Kit
Route Hydraulic Hoses
Route hoses along loader mount, under the right side of the operator’s platform, and over the rear axle.
Be sure to avoid contact with
Hoses must be routed so they are not pinched, bent sharply, or chafed during operation. Hoses must not interfere with any tractor control operation or contact any moving parts.
Connect hydraulic hoses to tractor hydraulic couplers as shown in Figure 9 when loader is attached to trac- tor.
/()7 6,'( |
| 5,*+7 6,'( |
+<'5$8/,& |
| |
| +<'5$8/,& | |
&21752/ |
| |
| &21752/ | |
| ||
' | % | |
& |
| |
| $ | |
|
|
Figure 9. Hydraulic Hose Connection to Tractor
Install Hose Hanger
1.Install hose hanger bracket beneath right side of the operator’s platform as shown in Figure 10. Use cap screw, flat washers, and lock nut as shown in Figure 11.
2.Route hoses through support and secure with lock pin (15).
11.58033 Hose hanger bracket
12.6778 5/16 NC Lock nut
13.4378 5/16 Flat washer
14.6250 5/16 NC x
15.58047 1/4 x
+26( |
+$1*(5
Figure 10. Hose Hanger Installed
Figure 11. Hose Hanger Assembly
10 Hydraulic Installation | MAN0064 (Rev. 7/20/2007) |
|
|
