Woods Equipment 111877 manual Hose Kit Install Hoses, Hydraulic Installation

1001420 Hose Kit

Install Hoses

1.Attach 90° end of hoses (7) to the IN, OUT and

	PBY ports of the loader control valve.			1
2.	Locate the fill plug on the top of right rear axle			7
	and remove.			P
3.	Install adapter (5) and elbow (6) into opening.				N
4.	Attach hose from the PBY port on the loader
	control valve to elbow (2) in the PBY (N) port on
	the front of adapter plate (3).
5.	Attach hose from the IN port on the loader control
	valve to elbow (1) in the PRESSURE (P) port on
	the side of adapter plate.			7	2
6.	Attach hose		from the OUT port on the loader
				Figure 15. Hose Connection at Adapter Plate
	control valve to elbow (6) in the RETURN port on
	the top of the rear axle.
					7
	1.	316004	Elbow, 3/4 JICM x 3/4 ORBM 90°
	2.	313032	Elbow, 3/4 JICM x 3/4 JICF 90°	6
	5. 1001419		Adapter, 7/8 O-ring F x 1-3/8 Trd M

or

5. 1001657 Adapter, 7/8 O-ring F x 1-5/8 Trd M

6.60 Elbow, 3/4 JICM x 7/8 ORBM 90°

7.1001422 Hose, 86" x 3/4 JICF x 3/4 JICF

5

Figure 16. RETURN Port Connection

MAN0064 (Rev. 7/20/2007) Hydraulic Installation 13