Install Exhaust Relocation Kit 1024092
ROPS Tractors only
1.Attach exhaust bracket (2) to the right loader mount using two carriage bolts (4) hardened flat washers (5), and hex nuts (6).
NOTE: Carriage bolts must be installed so that the heads are inside the loader mount.
2.Torque carriage bolts to 170
3.Attach new exhaust stack (1) to tractor muffler using hardware previously removed. Do not tighten at this time.
4.Slide exhaust clamp (3) around exhaust stack.
5.Position stack and clamp against exhaust bracket
(2)and secure using lock nuts provided with clamp.
6.Tighten exhaust stack hardware at muffler.
1.1024093 Exhaust stack
2.1023019 Exhaust bracket
3.72130 Exhaust clamp 3/8 x
4.5607 5/8 NC x
5.57817 5/8 Hardened flat washer
6.230 5/8 NC Hex nut
Figure 6. Exhaust Kit Installation
DP6
Figure 7. Exhaust Kit Installed
6 Mount Installation | MAN0572 (Rev. 1/30/2009) |
|
|
