Install Grill Guard (Optional)
1.Attach grill guard (1) to the front of the tractor using four cap screws (2) and flat washers (3).
2.Torque hardware to 244
1.1018190 Grill guard
2.1001377 M20 x 2.5P x 40 mm HHCS
3.57798 3/4 Hardened flat washer
3
2
Figure 8. Grill Guard Installed
Install Oscillation Stops (Optional)
Check front tire clearance after loader has been installed.
Using the loader, raise front of tractor off the ground to achieve full oscillation of front axle. Turn front tires completely to the right and left and check for tire con- tact with loader or loader mounts. If tire contact is present, install oscillation stops and/or adjust steering stop bolts.
1.Attach oscillation stops (3) to right side of tractor using cap screws (5) and hardened flat washer
(8). See Figure 9.
2.Repeat for oscillation stop installation on left side of tractor.
3.Torque cap screws to 244
3. 1018180 Oscillation stop
5.1001377 M20 x 2.5P x 40 mm HHCS CL10.9
8.1006371 3/4 Hardened flat washer
8
5
3
DP8
Figure 9. Oscillation Stop Installed, Right Side
As a valued customer, Woods appreciates your comments. Once loader mount and hydraulic hoses have been installed, please take a few minutes to complete the Loader Mount Evaluation sheet that was supplied with your loader mount. Your comments will help us continue to bring you quality products.
MAN0572 (Rev. 1/30/2009) | Mount Installation 7 |
|
|
