SUB-FRAME INSTALLATION Cont’d

CAUTION

νIf you do not understand any part of this manual and need assistance, see your dealer.

νAlways wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head.

￿

*Operator’s seat must be located in the lowest and most forward position to obtain 40” minimum radius.

Figure 1 Sub-Frame Clearance

TRACTOR PREPARATION

1.Refer to the WOODS BH9000 Backhoe Opera- tor’s Manual for backhoe assembly instructions.

NOTE: For installing this sub-frame, reference to right, left, forward and rearward directions are determined from the operator’s position in the trac- tor seat.

2.Remove the tractor top link, 3-point lower lift arms, and anti-sway links.

3.Remove three bolts from both lower 3-point arm pivot pins, leave pins in place (Figure 2).

4.NOTE: Leave all hardware loose until sub- frame weldment has been fit up.

Figure 2 Remove hardware from pivot pins

4 INSTALLATION

MAN0047 (9/15/00)

 

Page 6
Image 6
Woods Equipment BH9000 manual SUB-FRAME Installation Cont’d, Tractor Preparation