Install CV Drive (BW180HD)- Optional

Before installing cutter input driveline to gearbox, check the tag wired to the driveline and the tag wired to the input shaft of gearbox. Ensure the tag rpm speeds match the rpm speed decal on front of cutter. After con- firming all speeds match, remove and discard tags and then complete driveline assembly.

1.Align hole in drive yoke with groove on gearbox input shaft and slide rear half of drive (23) onto shaft.

2.Secure with bolt and nut supplied with drive.

23.CV Drive

Figure 29. CV Drive Installation

Install Wing (BW180HD)

CAUTION

Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponents.

7.Side skid 15.Hinge pin

35. 1" Flat washer

37. Spring pin, 1/4 x 1-1/2

55. 1/2 NC Lock nut

56. 1/2 NC x 1-1/2 carriage bolt

Figure 30. Right Wing Installation

Install Wing Cylinder & Lock-up Bar (BW180HD)

The wing must be installed in the following sequence and will require at least two people. A floor jack or a suitable lifting device will be helpful to align decks when installing the hinge pin.

Check RPM tags on wing and center section to make sure they match before proceeding.

1.

Remove hinge pin (15) from center section.

2.

Place wing assembly adjacent to the center section

 

and align hinge sections.

3.

Insert hinge pin through the hinge sections and

 

secure with spring pin (67) and washer (35) on

4.Hydraulic cylinder

17. Spacer, 1"

18. 1 x 2.72 Clevis pin

19. Wing lock-up bar

22. 1" x 4.08" Clevis pin

23. Cylinder link

24. Cylinder link

25. Spacer, 3/4

26. Lock-up pin 1" x 5"

27. Washer, 1 x 1-7/8

40.1/2 NPT x 1/4 NPT Reducer bushing

41.1/4 NPT x 1/4 NPT Restricted

42.1/4 NPT x 1/4 NPT x 200" Hose

45. 3/16 Safety pin

66. 1/4 x 1-1/2 Cotter pin

 

both ends.

4.

Attach side skid (7) to the wing using four carriage

 

bolts (56) and flange lock nuts (55).

5.

Repeat procedure of opposite wing.

Figure 31. Wing Cylinder & Lock-Up Bar Installation

1.Place two cylinder links (23 & 24) on either side of cylinder lug on center section as shown, align holes and insert clevis pin (22).

MAN0805 (4/30/2009)

Assembly 37

 

 

Page 36 Page 38
Page 37
Image 37
Woods Equipment BW180HBQ, BW126HBQ manual Install CV Drive BW180HD- Optional, Install Wing BW180HD
Page 36 Page 38

BW126HBQ, BW126HB, BW180HBQ specifications

Woods Equipment is renowned for its dedication to high-quality agricultural equipment, and the BW126HB, BW180HBQ, and BW126HBQ models exemplify this commitment. These models are designed for various applications, ensuring they meet diverse farming and landscaping needs.

The Woods BW126HB is a robust and versatile brushcutting mower designed for heavy-duty use. It features a 12-foot working width, enabling operators to cover large areas quickly and efficiently. This model is equipped with a powerful hydraulic drive system that enhances performance and reduces maintenance needs. The durable design includes a reinforced frame and high-strength cutting blades, ensuring exceptional performance even in challenging conditions. The adjustable cutting height allows for customizing the mowing experience, making it suitable for different terrains and vegetation types.

Next, the BW180HBQ model is geared towards high-capacity operations. With an impressive 15-foot working width, it is ideal for large-scale land management tasks. This model features an innovative Quick Attach System, allowing for fast attachment and detachment from various tractors. The advanced cutting technology employed in the BW180HBQ ensures a clean cut, promoting healthier growth of the remaining grass. Additionally, its steel construction and corrosion-resistant coating enhance durability and longevity, making it a wise investment for any agricultural operation.

The Woods BW126HBQ combines the benefits of the BW126HB with added versatility. This model is a quad-mount design that provides operators with improved stability and control. Equipped with a 12-foot cutting width, it seamlessly handles larger areas while still being able to navigate tight spots. Its dual hydraulic motors enable enhanced power efficiency, reducing fuel consumption while maximizing productivity. The innovative blade system incorporated in the BW126HBQ allows for superior mulching capabilities, further enhancing its utility for land management and landscaping.

All three models showcase Woods Equipment's dedication to user-friendly features. Each mower is designed with easy-to-reach controls and intuitive operation, ensuring a smooth experience for operators of all skill levels. The incorporation of advanced technologies, such as enhanced cutting efficiency and reduced noise operation, showcases Woods’ commitment to innovation.

In summary, the Woods BW126HB, BW180HBQ, and BW126HBQ models are exemplary options for those seeking high-performing brushcutting solutions. Each model has unique features and capabilities, making them suitable for various agricultural tasks. Their durability, efficiency, and user-friendly designs highlight Woods Equipment's mission to provide exceptional machinery for modern farming and landscaping needs.
Top Page Image Contents