Woods Equipment TCH4500 manual Assembly

3.Attach locking plate (15) to the opposite side of the chipper hopper using two carriage bolts (2), flat

washers (1), and stop nuts (3).

13

16

14

		DP7		Hinge
		Figure 15. Lanyard Installed
3		6. Attach latch (11) to chute extension using two
	2
		carriage bolts (16) and lock nuts (14).
15	1
DP6
		16
Figure 14. Locking Plate Installed
		14
4. Place chute extension (7) on chipper hopper and			11
attach it to hinge (6) using three carriage bolts (2),
flat washers (1), and stop nuts (3).

5.Attach lanyard (10) to chute extension (7) using carriage bolt (16), flat washer (13), and lock nut (14).

							DP8
							Figure 16. Hinge Latch Installed
				16
				10		11 14
				14			1.	3/8 Flat washer
				13			2.	3/8 NC x 1 Carriage bolt GR5
							3.	3/8 NC Elastic stop nut
			12	9			5.	Chipper hopper
						CD6761-1	6.	Hinge
				8	2		7.	Chipper extension
							8.	Rubber flap
				7
	13		1	3			9.	Flap retainer strap
							10.	Lanyard, 20”
14
							11.	Latch
	1
6				2 15			12.	5/16 NC x 1 Carriage bolt GR5
	3
							13.	5/16 Flat washer
1				5
			2				14.	5/16 NC Lock nut
3		1	2				15.	Locking plate
							16.	5/16 NC x 3/4 Carriage bolt GR5
				Figure 17. Chipper Hopper and Extension Installation

24 Assembly MAN0458 (9/23/2005)