-2-
D4327/D4328 - For Models Manufactured Since 3/12
4. Use a 1⁄4" drill bit to drill pilot holes approximately
1" deep in the underside of the workbench, where
the lag screws will be used.
5. Attach the vise to the workbench with two #10 x 2"
wood screws through the face of the vise jaw, as
shown in Figure 4.
6. Secure the vise to the underside of the workbench
with four 5⁄16" x 13⁄4" lag screws and 5⁄16" flat wash-
ers as shown in Figure 4.
Note: If you're using a shim, make sure the lag
screws pass completely through the shim and secure
at least halfway into the workbench thickness, as
shown in Figure 5.
Wood Screw
Vise
Workbench
Flat
Washer
Lag Screw
Figure 4. Attaching vise to workbench.
Wood Screw
Wood
Screw
Vise
Workbench
Flat
Washer
Lag Screw
Shim
Figure 5. Attaching vise to workbench
with shim between vise and workbench.
Operation
Rotating the handle (Figure 6) clockwise moves the slid-
ing jaw toward the fixed jaw; rotating handle counter-
clockwise moves the sliding jaw away from the fixed jaw.
Moving the quick release lever (Figure 6) towards the vise
handle disengages the leadscrew so the sliding jaw can be
freely moved by pushing or pulling it.
Tightening/loosening the finger bolt (Figure 6) allows for
adjustment the height of the bench dog.
Figure 6. Operation controls of vise.
Quick
Release
Lever
Handle
Maintenance
The painted parts of the vise can be cleaned with a damp
rag. If wood pitch has built up on the components, clean
this with a pitch dissolver or blade and bit cleaner.
Lubricate the leadscrew with dry lubrication, such as sili-
cone or graphite, that will not cause sawdust to stick to
the threads.
If material becomes built up on the threads, clean thor-
oughly with a pitch dissolver.
Figure 7. Shop Fox wood-faced magnetic
jaw pads (Models D3127-D3133).
Accessories
Ask your Shop Fox dealer for the wood-faced magnetic
jaw pads shown in Figure 7.
This vise is not a toy. DO NOT use as a crushing tool.
Never clamp containers with compressed or explosive
contents. Using incorrectly may cause serious injury.
Finger
Bolt