Glcc\p:fm\i
When opened, the pulley cover gives you access to change the pulley ratio so the bandsaw can cut at one of three speeds.
<EK8E>C<D<EK?8Q8I; D8B< JLI< k_\ YXe[jXn `j legcl^^\[ Y\]fi\ gifZ\\[`e^ Fk_\in`j\# j\m\i\ `ealip dXp fZZli%
Kf`ejkXcck_\glcc\pZfm\i#[fk_\j\jk\gj1
(% Position and rotate the pulley cover into place, as shown in
)% Install the two
*% Loosen the belt tension knob enough to install the belt on the appropriate pulley that will give the required blade speed. Refer to 9cX[\Jg\\[ on GX^\ )* for blade speed selections.
+% Adjust the belt tension knob (=`^li\(.), so the belt has approximately 1⁄4" deflection when pressed in between the pulleys, then close and secure the cover.
Belt Tension
Knob
=`^li\(.% Belt tension knob.
J<KLG
