Woodstock M1013 manual 9cX\Jg, KfZXe\YcX\jg\\j#fk\j\jk\gj1, Nfibg`\Z\ Jg\\`e DXk\i`Xc

D('(*Fne\ijDXelXcD]^%J`eZ\-&'0

9cX[\Jg\\[

The Model M1013 has these three blade speeds: 80, 120, and 200 FPM.

KfZ_Xe^\YcX[\jg\\[j#[fk_\j\jk\gj1

(% DISCONNECT BANDSAW FROM POWER!

)% Determine the best speed for your cut. The table in =`^li\), is provided as a basic guideline. Material thickness and the type of blade used will factor into FPM selection.

*% Slacken the V-belt (refer to the Glcc\p:fm\i subsection on GX^\(. for detailed instructions).

+% Position the V-belt on the pulleys for the desired FPM (feet per minute), as illustrated in =`^li\),.

,% Correctly tension the V-belt, then close and secure the pulley cover before beginning operation.

Efk\1 These suggested blade speeds are an average for both High Carbon Blades and Bimetal Blades. Refer to your saw blade manufac- turer for exact speeds.

Nfibg`\Z\	Jg\\[`e
DXk\i`Xc	=GD
Tool Steel	90
Stainless Steel	90
Alloy Steel	90
Bearing Bronze	90
High Carbon Steel	135
Medium Carbon Steel	135,195
Hard Brass	195
Hard Bronze	195
Low Carbon Steel	195
Soft Brass	195
Copper	255
Aluminum	255
Plastics	255

Efk\1=GD4Feet Per Minute.

Jg\\[Xk	N_\\c	Dfkfi
-'?q	Glcc\p	Glcc\p
80 FPM

FG<I8K@FEJ

120 FPM

200 FPM

=`^li\),% Blade cutting speed chart.

-23-