SECTION III: ADJUSTMENTS

Your Shop Fox® Fence has been pre-adjusted at the factory. However, it will be necessary to check and fine tune each adjustment with the fence installed on your saw. A quality steel rule and square will help you bring your new fence into perfect alignment.

A. TABLE CLEARANCE

It is important to minimize the gap between the bottom of the fence and the table so thin material will not slide under the fence during operation. This clearance must be uniform along the table surface. It is also very important that the fence does not contact the table surface when sliding from side to side.

With the fence mounted on the rails, try sliding it over the table. Make sure the fence is supported by all three rollers. Gauge the gap under the fence at various locations over the table surface. There should be a uniform gap of 1⁄16" between the bot- tom of the fence and the tabletop. If the gap is not uniform, loosen the rail mounting bolts and raise or lower one end of one or both rails to achieve a uniform gap.

If ripping thin laminates or veneers, clamp an auxiliary fence to the Shop Fox® Fence so it rests right on the table. This will ensure that thin mate- rial will not slip under the fence.

B. TRACKING

The spring tension on the rear roller will affect the ease with which the fence will travel from side to side. Too much spring tension will restrict free movement of the fence on the rails. Too little tension may allow the fence to derail if moved abruptly or allow the fence to skew slightly when being locked down. Tension is easily adjusted by reaching underneath the rear carriage (#44) and turning the adjustment nut (#48). Figure 10. Tightening the adjustment nut onto the stud will

-10-

increase the spring tension while loosening the adjustment nut will reduce the tension. To adjust tracking:

Adjustment nut

Figure 10. Rear spring adjustment.

Step 1.

Test ease of movement relative to tracking qual- ity. The best way to do this is to experiment with the rear roller tension until a setting is found that allows comfortable motion and tracking. Grab the fence by the handle and abruptly slide it back and forth several times. When changing direction, both front rollers should stay engaged to the rails. If either roller tends to move away from the rail, increase the rear spring tension and repeat the test.

Step 2.

Continue to increase or decrease rear spring tension as necessary until all rollers remain in constant contact with the rails when changing directions. Don't increase tension to the point that movement becomes restricted.

Shop Fox® Fence

Page 10 Page 12
Page 11
Image 11
Woodstock W1410 manual Section III Adjustments, Table Clearance, Tracking
Page 10 Page 12

W1410 specifications

Woodstock W1410 is an innovative and versatile digital weather station that has quickly garnered recognition for its reliability and advanced features. Designed for both amateur meteorologists and serious weather enthusiasts, it offers an array of functionalities that make weather tracking easier and more precise.

One of the standout features of the Woodstock W1410 is its large, easy-to-read LCD display. The screen provides a comprehensive overview of real-time weather conditions, including temperature, humidity, wind speed, and direction. Users can easily set their preferences to display the information in either metric or imperial units, which adds to the station's user-friendly nature.

The station utilizes cutting-edge technology to ensure accurate measurements. It incorporates an advanced sensor array that collects data from multiple environmental variables. This includes barometric pressure readings, rain gauge measurements, and UV index monitoring, allowing users to obtain a holistic view of their immediate weather conditions.

Wireless connectivity is another key characteristic of the W1410. The station can transmit data directly to a smartphone or tablet via a dedicated app, making it convenient for users to check weather updates remotely. This feature ensures that users can stay informed about changing weather conditions even when they are not near the station itself. Additionally, the app provides historical data storage, giving users the ability to analyze trends and patterns over time.

Moreover, the Woodstock W1410 is designed with durability in mind. Its weather-resistant casing means it can withstand various environmental conditions, making it suitable for use outdoors. This robustness ensures longevity and reliability, providing accurate data rain or shine.

Power efficiency is a noteworthy characteristic as well. The W1410 operates on batteries, with the option for solar power integration, thus reducing the overall energy consumption and making it an environmentally friendly choice.

In summary, the Woodstock W1410 digital weather station stands out due to its advanced monitoring capabilities, user-friendly interface, wireless technology, durability, and energy efficiency. Whether for personal use or educational purposes, it serves as a valuable tool for understanding and predicting weather phenomena, enriching the experience for its users.
Top Page Image Contents