Woodstock W1410 manual Section Iv Operations, A. Fine Positioning, B. Board Buddies

SECTION IV: OPERATIONS

To operate this, or any tool, safely and efficiently, it is essential to become as familiar with its char- acteristics as possible. Take as much time as necessary to become acquainted with the W1410 Shop Fox® Fence. The time you invest before you begin to use it will be time well spent.

While most safety measures are generally uni- versal, Woodstock reminds you that each work environment is different and safety rules should be considered as they apply to your situation.

The Item W1410 is specifically designed for use on table saws with 27" deep table surface. It must never be modified or used for any other purpose. Modifications or improper use of this tool will void all warranties. If you are not sure about operating the Shop Fox® Fence, DO NOT USE IT until you have resolved any questions or concerns you might have. Please contact Woodstock at the phone or address listed on page 2.

Figure 26. Fine fence adjustment.

A. FINE POSITIONING

Either one of the two front rollers can be used for extremely fine fence adjustments. Place your thumb against the knurled outer surface of one of the front rollers to rotate it. Figure 26. Moving the fence in this manner yields excellent control and accuracy.

B. BOARD BUDDIES®

The T-slot in the top of the Shop Fox® Fence has been customized to accept another popular product from Woodstock International: Board Buddies®. These one directional, spring loaded hold-down wheels keep material pressed firmly against the table and fence. They are fully adjustable and non-marking. Be sure to request the W1103 T- nuts separately from your Woodstock dealer for mounting Board Buddies® to your fence. Board Buddies® are a great addition to any fence system! For the location of your nearest Woodstock dealer, call Woodstock International at (360) 734-3482.

-18- Shop Fox® Fence