B. UNPACKING
The Item W1410 Shop Fox® Fence is shipped from our factory in a carefully packed carton. If you discover the product is damaged, please con- tact your local Woodstock dealer immediately for advice. Be sure to save the packing containers for possible inspection.
The Shop Fox® Fence weighs only 35 pounds. However, when lifting, we must caution against improper lifting techniques. Always keep your back straight and lift with your legs. If you are limited by the amount of weight you can lift and carry, please refrain from moving The Shop Fox® Fence until you get the necessary assistance.
Piece count for the W1410 Shop Fox® Fence.
Qty Description
1Shop Fox® Fence
1Front rail
1Back Rail
1Manual
1Scale
1Bag of Mounting Hardware
1Universal Blade Guard Bracket (optional)
Mounting Hardware Consists of:
43⁄8" - 16 x 1" Hex Bolts
93⁄8" Flat Washers
15⁄16" Drill Bit
13⁄8" - 16 Tap
1Rubber Bumper w/ Mounting Hardware
1Cross Brace w/ Mounting Hardware
C. PIECE INVENTORY
The parts are arranged in two layers of packing. Remove the parts in an orderly fashion. This will simplify identification and make inventory and assembly that much easier. When removing the parts, please take care not to destroy the foam and cardboard carton. It is a good idea to save the car- ton for future storage or shipment if necessary.
In the event that any parts or hardware are miss- ing, please contact Woodstock at the phone num- ber or address found on page 2 and we will send replacements right away.
D. CLEAN UP
Remove the plastic protective covering and wipe the fence off with a clean rag. Inspect all the parts (especially the contact areas) for burrs and other irregularities that might hinder assembly. If you find any burrs or “flash” from the machining or casting process, simply sand or file them flat. Although this is not a common occurrence, it is possible that one or more of the parts could have been missed during the machining and deburring process.
Shop Fox® Fence |
