Woodstock W1712 instruction manual Assembly, Unpacking, Inventory

ASSEMBLY

Unpacking

The Model W1712 was carefully packed when it left our warehouse. If you receive it damaged or missing any parts, please contact Woodstock International Service and Support at 1-360-734-

3482 or send e-mail to: tech-support@shopfox.biz.

Inventory

Layout and inventory the package contents list- ed below and familiarize yourself with the components to ease assembly.

Item	Qty.
A. Sander Unit	1
B. Cabinet Stand	1
• Side Panel L/R	2
• Front/Rear Panel	2
C. Table Hardware Bag	1
- Cap Screw 5⁄16"-18 x 3⁄4"	2
- Lock Nut 5⁄16"-18	2
- Flat Washer 1⁄4"	2
- Knob Bolt M6-1 x 15	2
D. 12" Disc Sanding Table	1
E. Belt Sanding Table	1
F. Main Hardware Bag	1
• Cabinet Stand Hardware Bag	1
- Hex Bolt 5⁄16"-18 x 3⁄8"	8
- Hex Bolt 5⁄16"-18 x 1"	2
- Hex Nut 5⁄16"	8
- Flat Washer 5⁄16"	18
- Lock Washer 5⁄16"	10
- 6MM Allen Wrench	1
• Floor Pad Bag	1
- Floor Pads	4
- Phillips Head Screw 3⁄16"-18 x 5⁄8"	....4

Read and understand this entire instruction manual before performing any

operations with your machine. Serious personal injury may occur if safety and operational informa- tion is not understood and followed.

The Model W1712 is a heavy machine at 165 lbs. Use assistance when lifting or moving the machine.

UNPLUG power cord before you do any assem- bly or adjustment tasks! Otherwise, serious per- sonal injury to you or others may occur!

A

D

ASSEMBLY

- Flat Washer 5⁄16"	4
- Hex Nut 5⁄16"	4
• Accessories Bag	1
- Belt Tension Lever	1
- Screwdriver	1
- Knob Bolt M8-1.25 x 20	1
- Stop Fence	1
G. Miter Gauge Assembly	1

-9-

G

FB

C

E

Figure 3. Inventory.