Changing Sanding
Disc Paper
The 12" disc sander requires 12" sanding discs with hook and loop backing that can be easily attached to the disc.
To install a new sanding disc on the 12" disc sanding surface:
1.UNPLUG THE SANDER!
2.Remove the disc sanding table.
3.Peel the old sanding paper off the sanding disc.
4.Place the new 12" sandpaper on the sand- ing disc as shown in Figure 26.
5.Replace the disc sanding table.
OPERATIONS
UNPLUG the power cord when making any adjust- ments during operation! Otherwise, serious per- sonal injury to you or others may occur!
