Woodstock W1813 manual 9Xj`Zfekifcj

N(/(*(/Fg\e<e[N`[\9\ckJXe[\i

9Xj`Z:fekifcj

Refer to =`^li\(- and the following descriptions to become familiar with the basic controls of your sander.

A

J

I

G

F

H

B

C

D

E

FG<I8K@FEJ

=`^li\(-%Basic controls.

8% 8dg\iX^\CfX[:_Xik1Displays the amper- age range for safe operation of the sanding motor. NEVER operate the sander above the SAFE range!

9% 8dg\iX^\CfX[D\k\i1Shows the amper- age used by the sanding motor during oper- ation.

:% Gfn\iC`^_k1Lights when power is con- nected to the machine.

;% JXe[`e^DfkfiFE9lkkfe1Starts the sand- ing motor when pressed.

<% <d\i^\eZpJkfg9lkkfe1Turns the sanding and conveyor motors F==. This button does NOT disconnect the machine from power.

=% :fem\pfi=\\[IXk\;`Xc1Controls the feed rate of the conveyor between 5 and 17 feet per minute (FPM).

>% :fem\pfiFE&F==Jn`kZ_n&;`jXYc`e^B\p1 Starts or stops the conveyor motor. Remove the key to disable the switch.

?% <c\mXk`feCfZb1Locks the sander assembly in place above the conveyor after reposi- tioning it with the elevation handwheel.

@% <c\mXk`feJZXc\Gf`ek\i1Displays the height of the sanding drum above the con- veyor.

A% <c\mXk`fe?Xe[n_\\c1Raises and lowers the sander assembly above the conveyor.

-19-