Woodstock W1814 manual ?\i\Xi\jfd\ilc\jkffccfnn\eZffj`eXe af`ek`ejkfZb1, ⁄ 2 Min

N(/(+Fne\ijDXelXcD]^%('&'/"

JkfZb@ejg\Zk`fe I\hl`i\d\ekj

?\i\Xi\jfd\ilc\jkf]fccfnn_\eZ_ffj`e^Xe[ af`ek`e^jkfZb1

•;FEFKaf`ekfijli]XZ\gcXe\jkfZbk_XkZfekX`ej cffj\befkj% Injury to the operator or damage to the workpiece can occur if the knots become dislodged during the cutting operation.

•;FEFKaf`ekfijli]XZ\gcXe\X^X`ejkk_\^iX`e [`i\Zk`fe% Cutting against the grain increases the likelihood of stock kickback, as well as tear-out on the workpiece.

:FII<:K	=<<;;@I<:K@FE
IFK8K@FE
FLK=<<;K89C<	@E=<<;K89C<
	N`k_>iX`e
@E:FII<:K	=<<;;@I<:K@FE
IFK8K@FE
FLK=<<;K89C<	@E=<<;K89C<
	8^X`ejk>iX`e

•Af`ek`e^Xe[jli]XZ\gcXe`e^n`k_k_\^iX`egif$ [lZ\jXY\kk\i]`e`j_Xe[`jjX]\i]fik_\fg\iX$ kfi% Cutting with the grain is described as feeding the stock on the jointer so the grain points down and toward you as viewed on the edge of the stock (=`^li\).).

Efk\1@]k_\^iX`eZ_Xe^\j[`i\Zk`feXcfe^k_\\[^\ f]k_\YfXi[#[\Zi\Xj\k_\Zlkk`e^[\gk_Xe[dXb\ X[[`k`feXcgXjj\j%

•I\dfm\]fi\`^efYa\Zkj]ifdk_\jkfZb.Make sure that any stock you process with the jointer is clean and free of any dirt, nails, staples, tiny rocks or any other foreign objects that may damage the jointer blades.

•FecpgifZ\jjeXkliXcnff[]`Y\ik_ifl^_pfli af`ek\i% Never joint MDF, particle board, plywood, laminates or other synthetically made materials.

•DXb\jli\XccjkfZb`jjl]]`Z`\ekcp[i`\[Y\]fi\ af`ek`e^%Wood with a moisture content over 20% will cause unnecessary wear on the knives and poor cutting results.

› DXb\jli\pflinfibg`\Z\\oZ\\[jk_\d`e`dld [`d\ej`fei\hl`i\d\ekj=`^li\j)/)0 Y\]fi\ \[^\af`ek`e^fijli]XZ\gcXe`e^#fi`kdXpYi\Xb fib`ZbYXZb[li`e^k_\fg\iXk`fe

=`^li\).% Correct setting for grain

alignment.

	10" Min.
1" Min.	FG<I8K@FEJ
1⁄2" Min.

=`^li\)/% Minimum dimensions for edge

jointing.

10" Min.

1⁄2" Min.

1" Min.

=`^li\)0% Minimum dimensions for

surface planing.

-21-