Wyse Technology Release 2.0.2 A

AInstalling Wyse Simple Imager 2.0.2

This appendix provides the detailed procedures you must complete to install Wyse Simple

Imager 2.0.2.

Before you begin installing Wyse Simple Imager, make sure you have met the

requirements on this checklist for the machine to which Wyse Simple Imager will be

installed:

Caution

Do not install Wyse Simple Imager on any machine which has Wyse Device

Manager software installed.

• One of the following 32-bit Windows operating systems must be installed (be sure that

all systems are up-to-date with current Microsoft service packs, patches, and updates):

·Windows 2003 Server Standard/Enterprise with SP2 or later

·Windows XP Pro with SP3 or later

Note

Virtual machine environments are not supported.

• IIS with FTP and HTTP (World Wide Web Service) must be installed, enabled, and

running.

• Any inexpensive external router with DHCP enabled must be connected to the

machine and both the machine and router must be isolated.

Caution

Wyse Simple Imager must be installed and used on a machine (with a

connected router running DHCP) that is isolated. Do not install Wyse Simple

Imager on any machine which is connected to a network.

• Any existing previous version of Wyse Simple Imager must be uninstalled.

• A single network adapter is supported. If you have two adapters, you must disable one

(for example, for a laptop with a wireless adapter, you must disable the wireless

adapter).

• All software firewalls and antivirus services must be stopped.

• Place the Wyse Simple Imager 2.0.2 software (found on the Conversion Software

Assembly CD-ROM) into a folder on the machine.