Installation
Setting the Clock
Press either of the Menu up/down buttons (under the lid to the bottom right of the display). The display then shows ENTER PIN (Personal Identification Number) in the top line.
ENTER PIN 12:00 am
The default PIN is 0000, you’ll find out later (page 24) how you can change this, but for now press 0000 on the keypad (under the lid to the bottom right of the display). This clears the top line and shows * for each number entered.
****
12:00 am
This takes you to the first level of the menu at step 1. This is the INSTALLATION level. The display looks like this:
1. INSTALL
Press an up or down menu button until you reach the SET CLOCK menu, and then press OK (or press 2 to go directly to the screen below):
2.SET CLOCK 4:00 pm
Enter the time by pressing the digits on the Console’s keyboard. Then press am or pm. Then press OK.
Press Clear to back out of the menu. If you press Clear while entering numbers, before you’re finished setting the clock, it clears the numbers. If you press Clear after you’ve set the time and pressed OK, you are asked to confirm, 1. YES, 2 NO. Pressing 1 takes you back to the HOME CONTROL screen. Pressing 2 stays in INSTALL mode.
20
Installation
Setting the phone numbers
Press either of the Menu up/down buttons (under the lid to the bottom right of the display). The display then shows ENTER PIN (Personal Identification Number) in the top line.
ENTER PIN 12:00 am
The default PIN is 0000, you’ll find out later (page 24) how you can change this, but for now press 0000 on the keypad (under the lid to the bottom right of the display). This clears the top line and shows * for each number entered.
****
12:00 am
This takes you to the first level of the menu at step 1. This is the INSTALLATION level. The display looks like this:
1. INSTALL
Press an up or down menu button until you reach the PHONE NUMS menu, and then press OK to go to the screen below (or press 3 to go into the PHONE NUMS menu ):
3. PHONE NUMS
Press an up or down Menu button to select the desired
PHONE 1
PHONE 2
PHONE 3
PHONE 4
PHONE 5
PHONE 6
Press OK at the desired number
Press Clear to back out of the menu. If you press Clear while entering numbers, before you’ve finished setting the phone number, it clears the numbers. If you press Clear after you finished entering the phone number and pressed OK, you are asked to confirm, 1. YES, 2 NO. Pressing 1 takes you back to the HOME CONTROL screen. Pressing 2 stays in INSTALL mode.
21
