Troubleshooting
PROBLEM | SOLUTION |
|
|
The alarm cause is shown on the display | To remove, Arm and Disarm from a |
even after disarming. | remote, or disarm by pressing a menu key |
| and entering the PIN on the Console. |
|
|
If the optional PowerHorn does not trip | • Be sure you set the dials on the |
when the alarm trips. | PowerHorn to the same SECURITY |
| LIGHT code as set in the Console. |
| • Plug the PowerHorn into another outlet |
| near the Console. |
|
|
The Motion Detector causes false alarms. | • All brands of motion detectors sense |
| motion by detecting a change in |
| temperature, therefore do not place |
| the detector near any sources of heat |
| such as over a heating vent or an air |
| conditioner. |
| • Do not place in a direct source of bright |
| light, such as sunlight. |
|
|
LIMITED ONE YEAR WARRANTY
X10 Wireless Technology, Inc. Limited One Year Warranty
X10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. X10 agrees to repair or replace, at its sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase. If service is required under this warranty:
Call
For help or more information on setup, please visit:
www.x10.com/support
Special Note
Intercom Systems
Intercom systems which send voice signals over existing electrical wiring may interfere with the ability to control modules from your security system with the intercom in use. If the intercom system has its own separate wiring it will not cause a problem.
44 | 45 |
