Icemaker Installation Instructions
Before using the icemaker
Cut the water pipe to desired length while ensuring it is free from excessive bends. Generally the total length should not be more than 5m. A A longer pipe may reduce water pressure and, as a result, reduce the water output
The water pipe should be away from any heat sources as it is not
The water pipe should be installed and tested by an Authorized ServiceAgent;
The icemaker should be connected to a water source of a pressure between 1.5PSI and 7PSI;
Cleaning the ice cube tray
Deactivate the ice machine function on the display panel.Take out the icemaker assembly. Turn the icemaker assembly over ice cube tray will be visible underneath.
Pull the elliptical fastener of the icemaker in direction 
.
Take out the ice cube tray in direction 
.
After | cleaning, | using | reverse | |
of direction above. Push the | ice machine firmly into place, Close the | |||
freezer | door, and | activate | the | ice machine function on the display panel. |
Precautions
Never install the icemaker's water tube in an area with the ambient temperature below 0
to avoid icing of water supply.
The icemaker will start ice cube making when the internal temperature reaches or is below 
. (If the icemaker is used for the first time or after an extended period of vacation, the first loads of cubed ice should be discarded as there maybe impurities in the water tube). 
After the appliance is installed, the water tube should be placed to prevent it from being crushed.
Installation of the icemaker can only be carried out by an Authorized Service Agent. 
This icemaker can only be supplied with drinking water.
Operating principle of the icemaker
Eight(8) ice cubes are made in every cycle. The ice making capacity depends on ambient temperature,
It is normal that some of the cubes stick to each other. (This can be improved by decreasing water supply duration).
For a newly installed refrigerator, please let the appliance operate for 24 hours before making ice.
Note
If this is your first icemaker
Some “cracking” sounds may be heard in the process of ice making, it's normal.
If you do not use cubed ice frequently
Cubed ice stored for an extended period may become opaque or emit an odor. Please empty the cubed ice storage box regularly and clean it with warm water. Before putting the box back, make sure to cool it down and to dry it. Otherwise cubed ices may stick to the box.
If you do not want to use the cubed ice storage box for an extended period
Turn the ice maker off by pressing J and then A2 on the panel. Take out all the cubed ice from the storage box and wash the box with warm water. Wipe the box with a dry towel before replacing it into the appliance. Turn off the valve between the water source and the appliance.
In order to use all of the available freezer storage compartment, the icemaker assembly can be taken out permanently.
20
