Fridge Compartment
| Use of the sliding half shelf |
Fig. | shows the extended state of the sliding shelf used to |
store small food containers. | |
Fig. | shows the retracted state of the sliding shelf which allows |
for taller food containers below.
To slide the shelf from state
to state , simply push
structure A upwards, and push structure B inward in the direction of the arrow shown in the figure so it slides under structure A.
To extend the shelf from state 
to state
, push structure A upwards, and pull structure B in the direction of the arrow shown in the figure.
Use of the wire wine holder
Fig. 
shows the folded state of the wire wine holder. In this state, other large item can be stored.
Fig. 
shows the extended state of the wire wine holder. In this state it can hold several wine bottles.
To extend it from state 
to state
, simply pull the wire down.The maximum total load of the bottle holder is 10 kg.
To fold it from state 
to state 
, simply push the wire rack up.
Make sure the ends of the shelves are on the same level.
Otherwise the shelf or the food may fall or spill.
Note
Recommended storage areas for various foods
As cold air circulates inside the refrigerator, there are temperature differences inside the fridge
compartment. Different foods should be placed in 
specified areas according to their properties.
Eggs, butter, cheese(Dairy) etc.
Drinks, canned food etc.
Seasonings and pickled food
Beverages, canned food, cake, etc.
Wine, champagne, etc.
Milk, cheese, etc
Cooked meat, fresh fish and raw meat, etc. Fruit, vegetables, salad, etc.
Lamp in the fridge compartment and its replacement
Do not attempt to repair or replace the lamp.If a replacement lamp is required, please contact Customer Care or an Authorized Service Centre.
16
