Onkyo TXSR307 Connecting the AV Receiver, Connecting the Speaker Cables, Strip about 5/8

Connecting the AV Receiver—Continued

Connecting the Speaker Cables

FRONT SPEAKERS A

1 Strip about 5/8" (15	5/8"(15mm)
mm) of insulation from
the ends of the
speaker cables, and
twist the bare wires
tightly, as shown.

2 Unscrew the terminal.

3 Fully insert the bare wire.

4 Screw the terminal tight.

OTHERS

1	Strip 3/8" (10 mm) of	3/8"(10mm)
	insulation from the
	ends of the speaker
	cables, and twist the
	bare wires tightly, as
	shown.
2	While pressing the lever,
	insert the wire into the
	hole, and then release the
	lever.

Make sure that the

terminals are gripping the bare wires, not the insulation.

The following illustration shows which speaker should be connected to each pair of terminals.

	Surround	Surround
	right speaker	left speaker
Front right	Front left	Center
speaker A	speaker A	speaker
	Speaker Set A

Front right	Front left
speaker B	speaker B
Speaker Set B

15