Listening to the Radio—Continued
Listening to AM/FM Stations
AM TUNING
FM | TUNING MODE |
With the
Use the [AM] or [FM] input selector button to select “AM” or “FM”.
In this example, FM has been selected.
or Band Frequency
(Actual display depends on country.)
Tuning into AM/FM Radio Stations
■ Auto Tuning Mode
1 |
|
|
|
| Press the [TUNING MODE] |
|
|
|
|
| |
|
|
|
|
| button so that the AUTO indicator |
|
|
|
|
| appears on the display. |
|
|
|
|
|
|
2 |
|
|
|
| Press the TUNING Up or Down |
|
|
|
|
| |
|
|
|
|
| [q]/[w] button. |
|
|
|
|
| Searching stops when a station is |
|
|
|
|
| found. |
|
|
|
|
|
|
■Manual Tuning Mode
1Press the [TUNING MODE] button so that the AUTO indicator
disappears from the display.
2 | Press and hold the TUNING Up or |
| |
| Down [q]/[w] button. |
| The frequency stops changing when |
| you release the button. |
| Press the button repeatedly to change |
| the frequency one step at a time. |
The North American model changes FM frequency in 0.2MHz steps, 10kHz steps for AM. For other models it’s 0.05MHz steps for FM and 9kHz (or 10kHz) steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.
Note:
You can also use the remote controller’s Up and Down [q]/[w] buttons to tune the radio.
When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator also appears.
FM STEREO
AUTO
TUNED
43