Controlling Other Components—Continued
Controlling an RI Dock
By pressing the REMOTE MODE button that’s been programmed with the remote control code for your RI Dock, you can control your iPod in the RI Dock with the following buttons.
The [DOCK] button is preprogrammed with the remote control code for controlling an RI Dock when used with an uconnection.
For some RI docks, the “ON/STANDBY” button may not work with a remote control code 82990 (without u).
In this case, make an uconnection and enter a remote control code 81993 (with u).
For details on entering a remote control code, see page 62.
When Using an RI Dock:
•Connect the RI Dock to the TV/TAPE IN, CBL/SAT IN or VCR/DVR IN L/R jacks.
•Set the RI Dock’s RI MODE switch to “HDD” or “HDD/DOCK”.
•Set the AV receiver’s Input Display to “DOCK” (see page 37).
•See to the RI Dock’s instruction manual for more information.
Press the appropriate
REMOTE MODE button first
a | h |
| i |
| j |
| k |
b | l |
| m |
c |
|
| n |
d | o |
e | p |
f | q |
g | r |
| |
| s |
*With some components, certain buttons may not work as expected, and some may not work at all.
aON/STANDBY button
Turns the iPod on or off.
Notes:
•This button does not turn the Onkyo
•Your iPod may not respond the first time you press this button, in which case you should press it again. This is because the remote controller transmits the On and Standby commands alternately, so if your iPod is already on, it will remain on when the remote controller transmits an On command. Similarly, if your iPod is already off, it will remain off when the remote controller transmits an Off command.
bTOP MENU button
Works as a Mode button when used with a
cArrow [q]/[w] and ENTER buttons*
Used to navigate menus and select items.
dPrevious [7] button
Restarts the current song. Press it twice to select the previous song.
eFast Reverse [5] button
Press and hold to Fast Reverse.
fPause [3] button
Pauses playback. (With 3rd generation iPod models, it works as a Play/Pause button.)
gREPEAT button*
Used with the repeat function.
hDISPLAY button*
Turns on the backlight for 30 seconds.
iMUTING button (39)
Mutes or unmutes the AV receiver.
jALBUM +/– button*
Selects the next or previous album.
kVOL [q]/[w] button (38)
Adjusts the volume of the AV receiver.
lMENU button*
Displays a menu.
mPLAYLIST [e]/[r] buttons*
Selects the previous or next playlist on the iPod.
nPlay [1] button
Starts playback. If the component is off, it will turn on automatically. (With 3rd generation iPod models, this button works as a Play/Pause button.)
oNext [6] button
Selects the next song.
pFast Forward [4] button
Press and hold to fast forward.
qStop [2] button
Stops playback and displays a menu.
66
