Onkyo TXSR307 instruction manual Front & Rear Panels-Continued, a b c d e fg, j k l m n o p

Front & Rear Panels—Continued

Rear Panel

a b c d e fg h i

j k l m n o p

aDIGITAL IN COAXIAL

These coaxial digital audio inputs are for connecting components with a coaxial digital audio output, such as a CD player or DVD/BD player. They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Digital Input Setup” on page 36.

bDIGITAL IN OPTICAL 1 and 2

These optical digital audio inputs are for connecting components with an optical digital audio output, such as a CD player or DVD/BD player. They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Digital Input Setup” on page 36.

cCOMPONENT VIDEO IN 1 and 2

These RCA component video inputs are for connecting components with a component video output, such as a DVD/BD player, DVD/BD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Component Video Input Setup” on page 36.

dCOMPONENT VIDEO OUT

This RCA component video output is for connecting a TV or projector with a component video input.

eHDMI IN 1–3 and OUT

HDMI (High Definition Multimedia Interface) connections carry digital audio and digital video. The HDMI inputs are for connecting components with an HDMI output, such as a DVD/BD player, DVD/BD recorder, or DVR (digital video recorder). The HDMI outputs are for connecting a TV or projector with an HDMI input.

fAM and FM ANTENNA

The AM push terminals are for connecting an AM antenna. The FM jack is for connecting an FM antenna.

gMONITOR OUT

The composite video jack should be connected to a video input on your TV or projector.

hFRONT SPEAKERS A, CENTER, and SURR L/R SPEAKERS

These terminal posts and push terminals are for connecting speaker set A.

iFRONT SPEAKERS B

These push terminals are for connecting speaker set B.

ju REMOTE CONTROL

This u(Remote Interactive) jack can be connected to the ujack on another u-capable Onkyo component for remote and system control. To use u, you must make an analog audio connection (RCA) between the AV receiver and the other component, even if they are connected digitally.

kCD IN

This analog audio input is for connecting a CD player’s analog audio output.

lTV/TAPE IN/OUT

These analog audio input and output jacks are for connecting a recorder with an analog audio input and output, such as a cassette deck, MD recorder, etc.

mCBL/SAT IN

A cable or satellite receiver can be connected here. There is composite video input jacks for connecting the video signal, and there are analog audio input jacks for connecting the audio signal.

9