Onkyo TXSR307 Listening to the Radio, AM/FM Frequency Step Setup not European models

Listening to the Radio

AM/FM Frequency Step Setup (not European models)

RECEIVER

4	Use the Left and Right [e]/[r]
	buttons to select:

(North American /Taiwan models) 200k/10k:

Select if 200k/10k steps are used in your area.

50k/9k: Select if 50k/9k steps are used in your area.

(Asian models)

ENTER

SETUP

qwer

10kHz: Select if 10kHz steps are used in your area.

9kHz: Select if 9kHz steps are used

	in your area.
5	Press the [SETUP] button.
	Setup closes.

For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.

2	Use the Up and Down [q]/[w]
	buttons to select “8.Hardware”,

and then press [ENTER].

3 Use the Up and Down [q]/[w] buttons to select “FM/AM” (North American /Taiwan model) or “AM Freq” (Asian models).

(North American /Taiwan models)

(Asian models)

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

42